1
00:00:00,000 --> 00:00:08,000
Customize a Default Component first.

2
00:00:08,000 --> 00:00:12,000
Select New Component > Deep Clone.

3
00:00:12,000 --> 00:00:18,000
Choose a sample with the same shape.

4
00:00:18,000 --> 00:00:26,000
Check the source and name the new asset.

5
00:00:26,000 --> 00:00:33,000
Name the component CAP_DISC_2P_V02.

6
00:00:33,000 --> 00:00:38,000
First Save creates a preview and file.

7
00:00:38,000 --> 00:00:44,000
Select the parametric shape under Shape.

8
00:00:44,000 --> 00:00:50,000
Set actual dimensions; click GENERATE.

9
00:00:50,000 --> 00:00:56,000
Click USE after generating the shape.

10
00:00:56,000 --> 00:01:04,000
Adjust Base Color under Appearance.

11
00:01:04,000 --> 00:01:12,000
Inspect the Bounding Box under LinkBase.

12
00:01:12,000 --> 00:01:20,000
Replace the box using a component face.

13
00:01:20,000 --> 00:01:29,000
Set box direction and height; Apply.

14
00:01:29,000 --> 00:01:37,000
Verify Geometry/Metadata sizes later.

15
00:01:37,000 --> 00:01:48,000
Adjust Connector position and rotation.

16
00:01:48,000 --> 00:01:53,000
Save the cloned asset to the library.

17
00:01:53,000 --> 00:01:59,000
Add Internal Component Group and save.

18
00:01:59,000 --> 00:02:05,000
After saving, set tool/feeder relations.

19
00:02:05,000 --> 00:02:12,000
Preview Tool G00101 in 3D.

20
00:02:12,000 --> 00:02:23,000
Adjust the gripper pose and position.

21
00:02:23,000 --> 00:02:29,000
Click SAVE TARGET for the tool relation.

22
00:02:29,000 --> 00:02:37,000
Preview Tape_3_Radial under Feeder.

23
00:02:37,000 --> 00:02:44,000
Save the feeder relation and close.

24
00:02:44,000 --> 00:02:54,000
Clear the workspace; find the new asset.

25
00:02:54,000 --> 00:03:03,000
Reopen and check the shape and box.

26
00:03:03,000 --> 00:03:08,000
Reload and preview the Tool relation.

27
00:03:08,000 --> 00:03:13,833
Preview the saved Feeder relation.

28
00:03:13,840 --> 00:03:21,840
Create Hello_Board under Product.

29
00:03:21,840 --> 00:03:31,840
Create or select HelloWorld for BOM.

30
00:03:31,840 --> 00:03:37,840
Import CSV: UTF-8 (no BOM), CRLF.

31
00:03:37,840 --> 00:03:42,840
Designator=RefDes; Part No.=PartNo.

32
00:03:42,840 --> 00:03:47,840
Map Description to AssetName.

33
00:03:47,840 --> 00:03:53,840
20 entries imported; 6 have no match.

34
00:03:53,840 --> 00:03:59,840
Yellow means unlinked; blue is linked.

35
00:03:59,840 --> 00:04:07,840
Find the part in Internal Library.

36
00:04:07,840 --> 00:04:14,840
Check the asset's name and shape.

37
00:04:14,840 --> 00:04:22,840
Select CAP_RADIAL_CAN_2P_V01.

38
00:04:22,840 --> 00:04:31,840
Enter Part No. and click OVERWRITE.

39
00:04:31,840 --> 00:04:37,840
Find the part number in HelloWorld.

40
00:04:37,840 --> 00:04:42,840
Click LINK for matching BOM entries.

41
00:04:42,840 --> 00:04:47,840
Check for blue entries and Linked: 20.

42
00:04:47,840 --> 00:04:57,840
Create the Top Layer (Gerber) Link.

43
00:04:57,840 --> 00:05:06,840
Add a 3D Shape Link and select Box.

44
00:05:06,840 --> 00:05:15,840
Check board size: 120 x 100 x 3 mm.

45
00:05:15,840 --> 00:05:24,840
Align board and annotation origins.

46
00:05:24,840 --> 00:05:33,840
Select Insertion; click ADD to annotate.

47
00:05:33,840 --> 00:05:38,840
Enter coordinates from the PNP data.

48
00:05:38,840 --> 00:05:46,840
Set C02: X=15, Y=77, RotZ=0.

49
00:05:46,840 --> 00:05:54,840
Add other Designators and coordinates.

50
00:05:54,840 --> 00:06:00,840
Check each Designator's X, Y, and RotZ.

51
00:06:00,840 --> 00:06:06,840
Check the layout with Payload Preview.

52
00:06:06,840 --> 00:06:14,840
Use at least two fiducials to align.

53
00:06:14,840 --> 00:06:20,840
Set Fiducial1: X=5, Y=5.

54
00:06:20,840 --> 00:06:27,840
Set Fiducial2: X=115, Y=95.

55
00:06:27,840 --> 00:06:34,840
Extract Workpart using From Shape.

56
00:06:34,840 --> 00:06:44,840
Review annotations and Workpart setup.

57
00:06:44,840 --> 00:06:50,840
Save with ProductCatalog membership.

58
00:06:50,840 --> 00:06:54,507
Click OK and confirm the save message.