1
00:00:00,000 --> 00:00:08,000
先從 Default Components 改造零件。
Customize a Default Component first.

2
00:00:08,000 --> 00:00:12,000
在 New Component 選擇 Deep Clone。
Select New Component > Deep Clone.

3
00:00:12,000 --> 00:00:18,000
從 Default Components 選擇相同外型。
Choose a sample with the same shape.

4
00:00:18,000 --> 00:00:26,000
確認來源資產並設定新元件名稱。
Check the source and name the new asset.

5
00:00:26,000 --> 00:00:33,000
將新元件命名為 CAP_DISC_2P_V02。
Name the component CAP_DISC_2P_V02.

6
00:00:33,000 --> 00:00:38,000
首次 Save 才會產生預覽並寫出新檔。
First Save creates a preview and file.

7
00:00:38,000 --> 00:00:44,000
展開 Shape 並選取參數化外型。
Select the parametric shape under Shape.

8
00:00:44,000 --> 00:00:50,000
依實際尺寸修改後按 GENERATE。
Set actual dimensions; click GENERATE.

9
00:00:50,000 --> 00:00:56,000
確認產生成功後按 USE 套用。
Click USE after generating the shape.

10
00:00:56,000 --> 00:01:04,000
在 Appearance 調整 Base Color。
Adjust Base Color under Appearance.

11
00:01:04,000 --> 00:01:12,000
展開 LinkBase 並檢查 Bounding Box。
Inspect the Bounding Box under LinkBase.

12
00:01:12,000 --> 00:01:20,000
移除舊包圍盒並以零件表面重建。
Replace the box using a component face.

13
00:01:20,000 --> 00:01:29,000
設定包圍盒方向與高度後按 Apply。
Set box direction and height; Apply.

14
00:01:29,000 --> 00:01:37,000
幾何與 Metadata 尺寸仍需另外核對。
Verify Geometry/Metadata sizes later.

15
00:01:37,000 --> 00:01:48,000
在 3D 畫面調整 Connector 位置與姿態。
Adjust Connector position and rotation.

16
00:01:48,000 --> 00:01:53,000
按 Save to Library 更新複製後的新資產。
Save the cloned asset to the library.

17
00:01:53,000 --> 00:01:59,000
加入 Internal Component Group 後儲存。
Add Internal Component Group and save.

18
00:01:59,000 --> 00:02:05,000
確認存檔成功後設定工具與供料器關係。
After saving, set tool/feeder relations.

19
00:02:05,000 --> 00:02:12,000
在 Tool 預覽 G00101 的 3D 關係。
Preview Tool G00101 in 3D.

20
00:02:12,000 --> 00:02:23,000
調整工具姿態並確認夾爪與零件位置。
Adjust the gripper pose and position.

21
00:02:23,000 --> 00:02:29,000
按 SAVE TARGET 儲存工具關係。
Click SAVE TARGET for the tool relation.

22
00:02:29,000 --> 00:02:37,000
在 Feeder 預覽 Tape_3_Radial。
Preview Tape_3_Radial under Feeder.

23
00:02:37,000 --> 00:02:44,000
儲存供料器關係後關閉視窗。
Save the feeder relation and close.

24
00:02:44,000 --> 00:02:54,000
清空工作區後從內部庫找回新零件。
Clear the workspace; find the new asset.

25
00:02:54,000 --> 00:03:03,000
重開 CAP_DISC_2P_V02 並檢查外型與包圍盒。
Reopen and check the shape and box.

26
00:03:03,000 --> 00:03:08,000
回讀並預覽已儲存的 Tool 關係。
Reload and preview the Tool relation.

27
00:03:08,000 --> 00:03:13,833
切至 Feeder 並預覽已儲存的關係。
Preview the saved Feeder relation.

28
00:03:13,840 --> 00:03:21,840
在 Product 建立 Hello_Board。
Create Hello_Board under Product.

29
00:03:21,840 --> 00:03:31,840
在 BOM 建立或選擇 HelloWorld 資料庫。
Create or select HelloWorld for BOM.

30
00:03:31,840 --> 00:03:37,840
匯入 UTF-8 無 BOM、CRLF 格式的 CSV。
Import CSV: UTF-8 (no BOM), CRLF.

31
00:03:37,840 --> 00:03:42,840
Designator 對應 RefDes，料號對應 PartNo。
Designator=RefDes; Part No.=PartNo.

32
00:03:42,840 --> 00:03:47,840
將 Description 對應至 AssetName。
Map Description to AssetName.

33
00:03:47,840 --> 00:03:53,840
已匯入 20 筆，其中 6 筆尚無相符元件。
20 entries imported; 6 have no match.

34
00:03:53,840 --> 00:03:59,840
黃色表示未連結，藍色表示已連結。
Yellow means unlinked; blue is linked.

35
00:03:59,840 --> 00:04:07,840
在 Internal Library 尋找對應的零件。
Find the part in Internal Library.

36
00:04:07,840 --> 00:04:14,840
核對所選資產的名稱與外型。
Check the asset's name and shape.

37
00:04:14,840 --> 00:04:22,840
選擇 CAP_RADIAL_CAN_2P_V01。
Select CAP_RADIAL_CAN_2P_V01.

38
00:04:22,840 --> 00:04:31,840
輸入 Part No. 後按 OVERWRITE 更新對應。
Enter Part No. and click OVERWRITE.

39
00:04:31,840 --> 00:04:37,840
切回 HelloWorld 尋找剛設定的料號。
Find the part number in HelloWorld.

40
00:04:37,840 --> 00:04:42,840
按 LINK 連結相同料號的 BOM 項目。
Click LINK for matching BOM entries.

41
00:04:42,840 --> 00:04:47,840
確認清單呈藍色且 Linked 顯示 20。
Check for blue entries and Linked: 20.

42
00:04:47,840 --> 00:04:57,840
建立 Top Layer (Gerber) Link 作為標註容器。
Create the Top Layer (Gerber) Link.

43
00:04:57,840 --> 00:05:06,840
新增 3D Shape Link 並選 Box 設定板形。
Add a 3D Shape Link and select Box.

44
00:05:06,840 --> 00:05:15,840
確認板尺寸為 120 × 100 × 3 mm。
Check board size: 120 x 100 x 3 mm.

45
00:05:15,840 --> 00:05:24,840
調整 Link 與原點，使板子及標註共用基準。
Align board and annotation origins.

46
00:05:24,840 --> 00:05:33,840
切至 Insertion 並按 ADD 新增標註。
Select Insertion; click ADD to annotate.

47
00:05:33,840 --> 00:05:38,840
本例依 PNP 資料直接輸入座標數值。
Enter coordinates from the PNP data.

48
00:05:38,840 --> 00:05:46,840
設定 C02：X=15、Y=77、RotZ=0。
Set C02: X=15, Y=77, RotZ=0.

49
00:05:46,840 --> 00:05:54,840
逐一新增其餘零件的 Designator 與座標。
Add other Designators and coordinates.

50
00:05:54,840 --> 00:06:00,840
確認各 Designator 的 X、Y 與 RotZ。
Check each Designator's X, Y, and RotZ.

51
00:06:00,840 --> 00:06:06,840
按 Payload Preview 檢查零件配置。
Check the layout with Payload Preview.

52
00:06:06,840 --> 00:06:14,840
切至 Fiducial，定位至少需要兩個光學點。
Use at least two fiducials to align.

53
00:06:14,840 --> 00:06:20,840
設定 Fiducial1：X=5、Y=5。
Set Fiducial1: X=5, Y=5.

54
00:06:20,840 --> 00:06:27,840
設定 Fiducial2：X=115、Y=95。
Set Fiducial2: X=115, Y=95.

55
00:06:27,840 --> 00:06:34,840
選取 Workpart 並按 From Shape 自動擷取。
Extract Workpart using From Shape.

56
00:06:34,840 --> 00:06:44,840
存檔前核對標註及 Workpart 設定。
Review annotations and Workpart setup.

57
00:06:44,840 --> 00:06:50,840
存檔時確認群組包含 ProductCatalog。
Save with ProductCatalog membership.

58
00:06:50,840 --> 00:06:54,507
按 OK 儲存並確認完成提示。
Click OK and confirm the save message.